Datamax DMX E E-4204 User Manual

40 E-4203/E-4204/E-4304
To print the Hex Dump Label:
With the printer on, loaded with media (at least 4 inches wide) and ribbon
(if printing with thermal transfer media), press and hold the
button
while turning the printer on. Continue holding the
button until the
PAUSED Light turns off. Now, all data received by the printer will be
output in hexadecimal code, as shown below.
To exit the Hex Dump Mode:
Turn the printer off.

Datamax DMX E E-4204 Specifications

General

Brand	Datamax
Model	DMX E E-4204
Category	Printer
Language	English