EasyManuals Logo
Home>DBL Technology>Gateway>GoIP-1

DBL Technology GoIP-1 User Manual

DBL Technology GoIP-1
69 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
DBL Technology Co., Ltd. GoIP User Manual
www.dbltek.com Technical Support: support@dbltek.com
56
5.4.6 SMS OutBox
Click [SMS OutBox] to view the last 10 SMS message sent as shown below. Press at the end of
each message to delete the message. Press to delete all message for the selected
line. Press to empty the SMS OutBox for all lines.
5.4.7 GSM Channel Control
This feature is implemented for two functions:
1. Removing the power to a GSM channel before removing or inserting a SIM card. This is the
recommended procedure in order to prevent damages to the SIM card.
2. Disabling a GSM channel temporary.
Click [GSM Channel Shut Down] to access the webpage below to shut each GSM module individually.
Place a check mark () to select the desired channel and then click [Save] to activate the shut down.
Remove the check mark and then click [Save] to turn on the channel again. The "All Channels" selection
is a short cut to turn on or to shut down all channels.
5.4.8 Ping Test
GoIP can use the Ping to test the reachability of the domain name or the IP address specified. It measures
the round trip time of messages from transmission to reception and reports errors and packet loss.
1. Specify the domain name or IP address in theAddress” field
https://arttel.ru/
https://arttel.ru/shop/gsm-shlyuzy/gsm-shlyuz-goip-4

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DBL Technology GoIP-1 and is the answer not in the manual?

DBL Technology GoIP-1 Specifications

General IconGeneral
BrandDBL Technology
ModelGoIP-1
CategoryGateway
LanguageEnglish

Related product manuals