Replacing the battery
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps
in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
CAUTION: Ensure the keyboard and keyboard-backlit cables are not under the battery.
1. Using the alignment post, place the battery on the palm-rest assembly.
2. Adhere the keyboard connector that secures the battery to the palm-rest assembly.
Post-requisites
1. Replace the
computer base.
2. Replace the rear-I/O cover.
3. Replace the solid-state drive.
4. Replace the wireless card.
5. Replace the
base cover.
31