Dell Console Switch User Manual

10 Product Overview
www.dell.com | support.dell.com
CAUTION: The power supplies in your system may produce high voltages and energy hazards, which
can cause bodily harm. Only trained service technicians are authorized to remove the covers and
access any of the components inside the system.
This document pertains only to the Dell Console Switch.
General
Observe and follow service markings:
• Do not service any product except as explained in your system documentation.
• Opening or removing covers that are marked with the triangular symbol with a lightning bolt
may expose you to electrical shock.
• Components inside these compartments should be serviced only by a trained service
technician.
– This product contains no serviceable components. Do not attempt to open.
• If any of the following conditions occur, unplug the product from the electrical outlet and
replace the part or contact your trained service provider:
– The power cable, extension cable, or plug is damaged.
– An object has fallen into the product.
– The product has been exposed to water.
– The product has been dropped or damaged.
– The product does not operate correctly when you follow the operating instructions.
• Keep your system away from radiators and heat sources. Also, do not block cooling vents.
• Do not spill food or liquids on your system components, and never operate the product in a
wet environment. If the system gets wet, see the appropriate section in your troubleshooting
guide or contact your trained service provider.
• Use the product only with approved equipment.
• Allow the product to cool before removing covers or touching internal components.
• Operate the product only from the type of external power source indicated on the electrical
ratings label. If you are not sure of the type of power source required, consult your service
provider or local power company.
NOTICE: To help avoid damaging your system, be sure the voltage selection switch (if provided) on the
power supply is set for the voltage that most closely matches the AC power available in your location.
• Be sure that your monitor and attached devices are electrically rated to operate with the
power available in your location.
• Use only power cables provided with this product.

Dell Console Switch Specifications

General

Brand	Dell
Model	Console Switch
Category	Switch
Language	English

Summary

Dell Console Switch Product Overview

Features and Benefits

SIP Intelligent Module

Tiering Expansion for Scalability

General Safety Precautions

Provides general safety guidelines, including handling power, avoiding hazards, and proper usage.

Rack Mounting Safety

Details safety considerations for installing equipment in racks, including loading, airflow, and earthing.

Console Switch Installation Guide

Getting Started with Installation

Rack Mounting Your Console Switch

Explains how to securely mount the Console Switch appliance into a rack cabinet.

Installing the Console Switch Unit

Details the process of plugging in the power cord and connecting the appliance.

Connecting SIPs to Servers

Provides step-by-step instructions for connecting Server Interface Pods (SIPs) to servers.

Connecting Local Peripherals

Tiering Console Switches for Expansion

Describes how to connect multiple Console Switches to expand server access.

Adding Compatible Legacy Switches

Explains how to integrate compatible legacy KVM switches into the system.

Adding Legacy KVM Switches

Details the steps for connecting and integrating legacy KVM switches with the Console Switch.

Setting Up Your Console Switch System

Guides on auto-detecting and configuring ports, naming, and OSCAR interface setup.

Basic Operation of the Console Switch

Controlling Your System Locally

Viewing and Selecting Ports and Servers

Details how to use the OSCAR Main dialog box to view and select servers.

Viewing Switch Status

Selecting Servers via OSCAR

Explains methods to select servers using the OSCAR interface, including by name, EID, or port.

Soft Switching Between Servers

Navigating the OSCAR Interface

Configuring OSCAR Interface Menus

Assigning Server Names

Assigning Device Types

Setting Console Security

Guides on setting up screen saver mode, inactivity time, and passwords for console access.

Resetting a SIP

Scanning Your System

Running System Diagnostics

Guides on validating system integrity by running diagnostics on the main board and SIPs.

Broadcasting to Servers

Changing Switch Mode