Replacing the solid-state drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling the
solid-state drive.
Procedure
1 Slide the solid-state drive rmly into the slot on the system board at an angle and
gently press the solid-state drive down until it snaps into position.
NOTE: Ensure that the solid-state drive is rmly seated.
24