Dell OptiPlex 5080 Small Form Factor User Manual

b. bezel
c. cover
3. Follow the procedure in After Working Inside Your Computer.
Installing the hard drive assembly
Steps
1. Insert the hard drive assembly into the slot on the computer.
2. Connect the power cable to the slot on the hard drive bracket.
3. Install the:
a. fan duct
b. cover
4. Follow the procedure in After Working Inside Your Computer.
Removing the optical drive
Steps
1. Follow the procedure in Before Working Inside Your Computer.
2. Remove the:
a. cover
b. front bezel
c. hard drive assembly
3. To release the optical drive:
a. Remove the hard drive connector cables from the optical drive latch [1].
b. Slide the blue latch to the unlock position [2].
4. To remove the optical drive:
a. Holding the blue latch [1], lift the optical drive cage and disconnect the cables from the optical drive. [2]
b. Lift the optical drive cage away from the computer [3].
Removing and installing components
13

Dell OptiPlex 5080 Small Form Factor Specifications

General

Brand	Dell
Model	OptiPlex 5080 Small Form Factor
Category	Desktop
Language	English