Dell P29T User Manual

Next steps
1. Install the battery.
2. Install the base cover.
3. Follow the procedure in after working inside your computer.
Input Output board
Removing the Input and output board
Prerequisites
NOTE:
The input and output board depends on the configuration ordered. Not all system configuration come with the
input and output board.
1. Follow the procedure in before working inside your computer.
2. Remove the base cover.
3. Remove the battery.
Steps
1. Disconnect the Type-C power cable from the connector in the IO board [1].
2. Open the latch and disconnect the 30-pin and 40-pin IO board cable from the connectors in the IO board [2].
28
Removing and Installing

Dell P29T Specifications

General

Brand	Dell
Model	P29T
Category	Laptop
Language	English