Option Description
C-States Control Allows you to enable or disable the additional processor sleep states.
● C states
Default setting: The option is enabled.
Intel TurboBoost Allows you to enable or disable the Intel TurboBoost mode of the processor.
● Enable Intel TurboBoost
Default setting: The option is enabled.
Hyper-Thread
Control
Allows you to enable or disable the Hyper-Threading in the processor.
● Disabled
● Enabled
Default setting: Enabled.
Power Management screen options
Option
Description
AC Behavior Allows you to enable or disable the computer from turning on automatically when an AC adapter is
connected.
Default setting: Wake on AC is not selected.
Enable Intel
Speed Shift
Technology
the option Enable Intel Speed Shift Technology option is enabled by default.
Auto On Time Allows you to set the time at which the computer must turn on automatically. The options are:
● Disabled
● Every Day
● Weekdays
● Select Days
Default setting: Disabled
USB Wake
Support
Allows you to enable USB devices to wake the system from Standby.
NOTE: This feature is only functional when the AC power adapter is connected. If the AC power
adapter is removed during Standby, the system setup removes power from all the USB ports to
conserve battery power.
● Enable USB Wake Support
● Wake on Dell USB-C Dock: This option is enabled by default.
Wireless Radio
Control
Allows you to enable or disable the feature that automatically switches from wired or wireless networks
without depending on the physical connection.
● Control WLAN Radio
● Control WWAN Radio
Default setting: The options are disabled.
Wake on LAN/
WLAN
Allows you to enable or disable the feature that powers on the computer from the Off state when
triggered by a LAN signal.
● Disabled
● LAN Only
● WLAN Only
● LAN or WLAN
Default setting: Disabled
Block Sleep This option lets you block entering to sleep (S3 state) in operating system environment.
Block Sleep (S3 state)
26 System setup options
To Next Page
Loading...
Need help?
General
