Table 9. Performance (continued)
Option Description
This option is set by default.
Intel TurboBoost
Allows you to enable or disable the Intel TurboBoost mode of
the processor.
● Enable Intel TurboBoost
This option is set by default.
Hyper-Thread Control
Allows you to enable or disable the HyperThreading in the
processor.
● Disabled
● Enabled—Default
Power management
Table 10. Power Management
Option Description
AC Behavior
Allows you to enable or disable the computer from turning on automatically when an AC adapter
is connected.
● Wake on AC
This option is not set by default.
Enable Intel Speed Shift
Technology
Allows you to enable or disable the Intel Speed Shift Technology.
● Enabled—Default
Auto On Time
Allows you to set the time at which the computer must turn on automatically.
The options are:
● Disabled—Default
● Every Day
● Weekdays
● Select Days
This option is not set by default.
USB Wake Support
Allows you to enable USB devices to wake the system from standby.
● Enable USB Wake Support
This option is not set by default.
Wireless Radio Control
This option if enabled, will sense the connection of the system to a wired network and
subsequently disable the selected wireless radios (WLAN and/or WWAN). Upon disconnection
from the wired network the selected wireless radio will ne enabled.
● Control WLAN radio
● Control WWAN radio
This option is not set by default.
Wake on LAN
This option allows the computer to power up from the off state when triggered by a special LAN
signal. Wake-up from the Standby state is unaffected by this setting and must be enabled in the
operating system. This feature only works when the computer is connected to AC power supply.
● Disabled—Default - Does not allow the system to power on by special LAN signals when it
receives a wake-up signal from the LAN or wireless LAN.
● LAN Only - Allows the system to be powered on by special LAN signals.
108 BIOS setup