2. Install the:
a. palmrest
b. WWAN card
c. WLAN card
d. hard drive
e. keyboard
f. battery
g. base cover
h. SD card
3. Follow the procedure in After working inside your computer.
Display bezel
Removing the display bezel
1. Follow the procedure in Before working inside your computer.
NOTE: If a touch LCD is installed, then the following procedure is not applicable as it is for a full hinge assembly.
2. Remove the:
a. SD card
b. base cover
c. battery
d. keyboard
e. hard drive
Removing and installing components
87
To Next Page
Loading...
Need help?
General
