Removing the power-adapter port
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1. Remove the base cover.
2. Remove the battery.
Procedure
1. Remove the two screws (M2.5x4) that secure the right hinge to the system board and palm-rest and keyboard assembly.
2. Lift the palm-rest and keyboard assembly at an angle to lift up the right hinge.
23
38 Removing the power-adapter port