Replacing the palm-rest and keyboard
assembly
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
Place the palm-rest and keyboard assembly on a flat surface.
Post-requisites
1. Replace the touchpad.
2. Replace the system board.
3. Replace the display assembly.
4. Replace the coin-cell battery.
5. Replace the heat sink.
6. Replace the fan.
7. Replace the power button or power button with fingerprint reader(if installed).
8. Replace the I/O board.
9. Replace the wireless card.
10. Replace the solid-state drive.
11. Replace the battery.
12. Replace the speakers.
13. Replace the base cover.
36
58 Replacing the palm-rest and keyboard assembly
To Next Page
Loading...
