Dell P87G User Manual

Removing the display hinges
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1. Remove the base cover.
2. Remove the wireless card.
3. Remove the display assembly.
4. Remove the display bezel.
5. Remove the display panel.
Procedure
1. Remove the six screws (M2.5x2.5) that secure the hinges to the display back-cover and antenna assembly.
2. Remove the two screws (M2x2) that secure the hinge brackets to the display back-cover and antenna assembly.
3. Using a plastic scribe, pry the brackets away from the guides on the display back-cover and antenna assembly.
4. Lift the hinges and brackets off the display back-cover and antenna assembly.
43
66 Removing the display hinges

Dell P87G Specifications

General

Brand	Dell
Model	P87G
Category	Laptop
Language	English