Dell P87G User Manual

Replacing the display cable
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
1. Route the display cable through the routing guides on the display back-cover and antenna assembly.
2. Adhere the adhesive tape that secures the camera cable to the display back-cover and antenna assembly.
3. Slide the camera cable into the connector on the camera module to secure the cable.
Post-requisites
1. Replace the display hinges.
2. Replace the display panel.
3. Replace the display bezel.
4. Replace the display assembly.
5. Replace the wireless card.
6. Replace the base cover.
46
Replacing the display cable 69

Dell P87G Specifications

General

Brand	Dell
Model	P87G
Category	Laptop
Language	English