EasyManuals Logo
Home>Dell>Server>PowerEdge R510

Dell PowerEdge R510 User Manual

Dell PowerEdge R510
216 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #66 background imageLoading...
Page #66 background image
66 Using the System Setup Program and UEFI Boot Manager
Processor Settings Screen
Option Description
64-bit Specifies if the processor(s) support 64-bit extensions.
Core Speed Displays the processor clock speed.
Bus Speed Displays the processor bus speed.
Logical Processor
(Enabled default)
Each processor core supports up to two logical
processors. If this field is set to Enabled, the BIOS
reports both logical processors. If set to Disabled,
only one logical processor is monitored by the BIOS.
Virtualization Technology
(Disabled default)
Enabled permits virtualization software to use the
virtualization technology incorporated in the processor.
NOTE: Disable this feature if your system will not be
running virtualization software.
Adjacent Cache Line
Prefetch
(Enabled default)
Enables high utilization of sequential memory access.
NOTE: Disable this option for applications that require
high utilization of random memory access.
Hardware Prefetcher
(Enabled default)
Enables or disables the hardware prefetcher.
Execute Disable
(Enabled default)
Enables or disables Execute Disable Memory Protection
Technology.
Number of Cores per
Processor
(All default)
If set to All, the maximum number of cores in each
processor is enabled.
Tu rbo M o d e
(Enabled default)
If Turbo Boost Technology is supported by the
processor(s), enables or disables Turbo Mode.
C States
(Enabled default)
When set to Enabled, the processor(s) can operate in all
available power states.
Processor 1 Family -Model-
Stepping
Displays the family, model, and stepping of the selected
processor.
Processor 2 Family -Model-
Stepping
Displays the family, model, and stepping of the
selected processor.
book.book Page 66 Friday, November 20, 2009 2:56 PM

Table of Contents

Other manuals for Dell PowerEdge R510

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell PowerEdge R510 and is the answer not in the manual?

Dell PowerEdge R510 Specifications

General IconGeneral
HDD size3.5 \
Hot-swapYes
HDD capacity450 GB
HDD interfaceSerial Attached SCSI (SAS)
Total storage capacity900 GB
Number of HDDs installed2
Number of HDDs supported8
Internal memory4 GB
Memory clock speed1066 MHz
Internal memory typeDDR3-SDRAM
Maximum internal memory64 GB
Tcase76 °C
Bus typeQPI
SteppingD0
FSB ParityNo
Processor codeSLBF6
Processor cache8 MB
Processor cores4
Processor modelE5540
System bus rate5.86 GT/s
Processor seriesIntel Xeon 5500 Series
Processor socketSocket B (LGA 1366)
Processor codenameNehalem EP
Motherboard chipsetIntel® 5500
Processing Die size263 mm²
Processor frequency2.53 GHz
Processor cache typeSmart Cache
Processor lithography45 nm
Processor system typeDP
Processor manufacturerIntel
Processor package size42.5 x 45 mm
Processor front side bus- MHz
Processor boost frequency2.8 GHz
Processor operating modes64-bit
Thermal Design Power (TDP)80 W
CPU multiplier (bus/core ratio)19
Number of Processing Die Transistors731 M
Memory channels supported by processorTriple
Memory clock speeds supported by processor800, 1066 MHz
Memory bandwidth supported by processor (max)25.6 GB/s
Maximum internal memory supported by processor144 GB
PS/2 ports quantity0
Serial ports quantity1
USB 2.0 ports quantity6
DisplayLCD
L1 cache0.064 MB
Form factor-
Graphics cardG200eW
Dimensions (WxDxH)86.4 x 436.6 x 609.6 mm
Compatible operating systemsMicrosoft Windows Small Business Server 2008/2003/ Novell SUSE Linux Enterprise Server 11/10 SP2 Linux Red Hat Enterprise 5.3/4.7 VMware vSphere Version 4.0 VMware ESX v3.5 / ESXi v3.5
Power consumption (typical)1100 W
Noise level42 dB
Chassis typeRack (2U)
PCI Express x4 slots3
Processor ARK ID37104
Intel® Turbo Boost Technology1.0
Weight and Dimensions IconWeight and Dimensions
Weight13500 g

Related product manuals