EasyManuals Logo

Dell PowerEdge R510 User Manual

Dell PowerEdge R510
216 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #93 background imageLoading...
Page #93 background image
Installing System Components 93
Figure 3-8. Removing and Installing a Hot-Swap Hard Drive
Installing a Hot-Swap Hard Drive
CAUTION: Use only hard drives that have been tested and approved for use with
the SAS/SATA backplane.
CAUTION: When installing a hard drive, ensure that the adjacent drives are fully
installed. Inserting a hard-drive carrier and attempting to lock its handle next to a
partially installed carrier can damage the partially installed carrier's shield spring
and make it unusable.
CAUTION: To prevent data loss, ensure that your operating system
supports hot-swap drive installation. See the documentation supplied
with the operating system.
CAUTION: Combining SATA and SAS hard drives in the same system
configuration is not supported on all configurations.
1
Remove the front bezel. See "Removing the Front Bezel" on page 86.
2
If a drive blank is present in the bay, remove it. See "Removing a
Hard-Drive Blank" on page 91.
3
Press the button on the front of the drive carrier.
1 release button 2 hard-drive carrier handle
book.book Page 93 Friday, November 20, 2009 2:56 PM

Table of Contents

Other manuals for Dell PowerEdge R510

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell PowerEdge R510 and is the answer not in the manual?

Dell PowerEdge R510 Specifications

General IconGeneral
HDD size3.5 \
Hot-swapYes
HDD capacity450 GB
HDD interfaceSerial Attached SCSI (SAS)
Total storage capacity900 GB
Number of HDDs installed2
Number of HDDs supported8
Internal memory4 GB
Memory clock speed1066 MHz
Internal memory typeDDR3-SDRAM
Maximum internal memory64 GB
Tcase76 °C
Bus typeQPI
SteppingD0
FSB ParityNo
Processor codeSLBF6
Processor cache8 MB
Processor cores4
Processor modelE5540
System bus rate5.86 GT/s
Processor seriesIntel Xeon 5500 Series
Processor socketSocket B (LGA 1366)
Processor codenameNehalem EP
Motherboard chipsetIntel® 5500
Processing Die size263 mm²
Processor frequency2.53 GHz
Processor cache typeSmart Cache
Processor lithography45 nm
Processor system typeDP
Processor manufacturerIntel
Processor package size42.5 x 45 mm
Processor front side bus- MHz
Processor boost frequency2.8 GHz
Processor operating modes64-bit
Thermal Design Power (TDP)80 W
CPU multiplier (bus/core ratio)19
Number of Processing Die Transistors731 M
Memory channels supported by processorTriple
Memory clock speeds supported by processor800, 1066 MHz
Memory bandwidth supported by processor (max)25.6 GB/s
Maximum internal memory supported by processor144 GB
PS/2 ports quantity0
Serial ports quantity1
USB 2.0 ports quantity6
DisplayLCD
L1 cache0.064 MB
Form factor-
Graphics cardG200eW
Dimensions (WxDxH)86.4 x 436.6 x 609.6 mm
Compatible operating systemsMicrosoft Windows Small Business Server 2008/2003/ Novell SUSE Linux Enterprise Server 11/10 SP2 Linux Red Hat Enterprise 5.3/4.7 VMware vSphere Version 4.0 VMware ESX v3.5 / ESXi v3.5
Power consumption (typical)1100 W
Noise level42 dB
Chassis typeRack (2U)
PCI Express x4 slots3
Processor ARK ID37104
Intel® Turbo Boost Technology1.0
Weight and Dimensions IconWeight and Dimensions
Weight13500 g

Related product manuals