Dell XPS 410 User Manual

9. Route the USB cable through the cable routing clip.

10. Replace the computer cover (see Replacing the Computer Cover).
CD/DVD Drive



Removing a CD/DVD Drive

1. Follow the procedures in Before You Begin.

2. Remove the computer cover (see Removing the Computer Cover).

3. Disconnect the power cable from the back of the drive and the CD/DVD drive cable from the back of the drive and the system board.

4. Slide the drive release mechanism to the right to release the shoulder screw and slide the drive out to remove it from the drive bay.

Installing a CD/DVD Drive
CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.
NOTE: If removing or installing the drive changes the drive configuration, you must reflect the changes in the BIOS. Go to the "Drives" section of the
BIOS and under SATA 0 through 5, set the SATA ports to the correct configuration.
1
CD/DVD drive cable
2
power cable
3
system board
1
sliding plate
2
CD drive

Dell XPS 410 Specifications

General

Brand	Dell
Model	XPS 410
Category	Desktop
Language	English