36
Making cappuccino
1. After attaching the milk container, position the
frothed milk regulator on CAPPUCCINO (fig.
28) printed on the milk container lid. The
quality of froth can be adjusted by moving
the regulator towards the word LATTE MAC-
CHIATO for a denser froth.
Moving it towards the word CAPPUCCINO
obtains a less dense froth.
2. Press the CAPPUCCINO icon (fig. 29). The
message "Cappuccino... Jug pointer in posi-
tion: 1" appears . After a few seconds, frothed
milk flows out of the milk spout into the cup
below.
The milk will stop automatically and delivery
of coffee will begin.
N.B.!
If during delivery you want to stop
preparing milk, press the CAPPUCCINO icon or
interrupt preparation of the coffee by pressing the
icon.
Making macchiato
1. After attaching the milk container, position the
frothed milk regulator (B1) on LATTE MAC-
CHIATO (fig. 30) printed on the milk container
lid.
2. Press the LATTE MACCHIATO button (fig. 31).
The message "Macchiato... Jug pointer in
position: 2" appears.
After a few seconds, frothed milk flows out of
the milk spout into the cup below.
The milk will stop automatically and delivery
of coffee will begin.
N.B.!
If during delivery you want to stop
preparing milk, press the LATTE MACCHIATO icon
or interrupt preparation of the coffee by pressing
the icon.
Making milk
1. After attaching the milk container, position the
frothed milk regulator (B1) according to the
quantity of froth you require (pos. 3 CAFFE-
LATTE = little froth; pos. 1 CAPPUCCINO =
abundant froth).
2. Press the MILK icon (fig. 32). "MILK" appears
on the display and after a few seconds, fro-
thed milk is delivered from the milk spout into
the cup below. Delivery of milk stops auto-
matically.
N.B.!
If during delivery you want to stop
preparing milk, press the MILK icon once.
Cleaning the milk container after
use
Important! Danger of burns
When clea-
ning the internal tubes of the milk container, a litt-
le hot water leaks out of the frothed milk tube
(B5). Avoid contact with splashes of water.
When "Press CLEAN button" flashes on the display
(each time you use a milk function):
1. Leave the jug in the machine (you do not need
to empty it);
2. Place a cup or other recipient under the fro-
thed milk spout.
3. Press the CLEAN button (fig. 33) and keep
pressing until the progress bar which appears
on the display together with the message
"Cleaning..." is complete.
4. Remove the milk container and always clean
the nozzle with a sponge (fig. 34).
N.B.!
• When "Press CLEAN button" flashes on the
display, you can still prepare any type of cof-
fee or milk. If you have to make a number of
drinks with milk, wait until you have delivered
the last cup before cleaning the container.
• The milk left in the jug can be kept in the refri-
gerator.
Programming the quantities of
coffee and milk in the cup
The appliance is factory preset to automatically
deliver standard quantities.
To change these quantities, proceed as follows:
1. Place a cup under the coffee spouts and milk
spout.
2. Press the icon corresponding to the function
you want to programme (CAFFELLATTE, CAP-
PUCCINO, LATTE MACCHIATO or MILK) until
"Milk for... Program quantity" appears on the
display and the icon corresponding to the
selected function flashes.
3. Release the icon. The appliance starts delive-
ring milk.
4. When the required quantity of milk has been
delivered into the cup, press the icon again.
5. After a few seconds, the appliance starts deli-
vering coffee into the cup and the message
"Coffee for... Program quantity" is displayed
To Next Page
Loading...
Need help?
General
