Select the target email address of a receiver when the condition of sending an email is met in
Trigger Receiving
table. And the specific email box is set in the
Email
section.
8.2.12 Ethernet Port Advance Setting – Socket
In the
Socket
table, you can set COM port parameters for data transmission through Ethernet; however, you need to
use this function along with specific API instructions. For more details, refer to the AS Series Programming Manual.
The AS300 Series PLC supports data transmissions between the CPU module and other CPU module or device
through sockets and the communication protocols including TCP and UDP are supported; four groups of connections
can be set respectively for each protocol. As for AS100 and AS200 Series PLC, two groups of connections are
supported respectively.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
To Next Page
Loading...
Need help?
General
