Delta HPP-1K5A01KAT User Manual

6.
3.2. Electrical Specification
Table 3.2 Electrical Specification
Item
Specification
Condition
Input Voltage
208V
AC
± 10% (Three Phase)
50 to 60Hz
Input Current (Per Phase)
5.5A
RMS
nominal per phase
Rated output power
Maximum Output Power
1.5kW
Measured at the DC output
Output Voltage Range
131V
DC
to 1000V
DC
Measured at the DC output
Output Current Range
0.01A to 4.62A
Measured at the DC output
Power Supply Efficiency
> 90%
Rated output power at DC 1000V
Power Factor
> 0.95
Rated output power
Output Voltage Ripple
< 2% (V
RMS
)
At DC Mode
Output Voltage Accuracy
1% of command setting or 0.25%
of full scale voltage between
output and command
Within operation range at 25 ˚C
At DC Mode
Output Current Accuracy
1% of command setting or 0.25%
of full scale current between
output and command
Within operation range at 25 ˚C
At DC Mode
D-sub Monitor/Command
(Analog Interface) Accuracy
1% of full scale rating between
output and D-sub
Operation range
Ignition Capability
1000Vdc to 1900Vdc
100Vdc increments
Temperature Coefficient
< 50ppm/˚C
20˚C to 40˚C
Variation in regulated output
Operation Mode
CV, CC, and CP Mode
-
Operation Temperature
0˚C to 40˚C
-
Arc Energy
< 200uJ per 1kW
-
Main Protection
OVP, OCP, OTP, SCP, ARC
Output Frequency
5K~400KHz, 5KHz increments
Reverse Time
0.4us to 10us, 0.1us increments
Allowable reverse time is limited
for a given frequency
Reverse Voltage
50V~100V, 10V increments
Repeatability
Output power repeatability of the
DC inverter from run to run at a
constant set-point is 0.1% from
10% to 100% of rated power.

Delta HPP-1K5A01KAT Specifications

General

Brand	Delta
Model	HPP-1K5A01KAT
Category	Power Supply
Language	English