4. Installation
4.1 Installing Location
WARNING！ Death and serious injuries may occur.
●Do not install the unit near/on the flammable objects.
●Do not install the unit at the location that people can entry/touch
easily.
●Please mount the unit tightly on the solid/ smooth wall.
●In order to ensure the safety of installers, installer shall be at least
two people to process the installation.
●When moving the Inverter, installer shall not stand under
machines.
CAUTION！ Machine and equipment damage may occur.
●Do not install the unit at the location that directly expose to
sunlight.
4.2 Mounting
This unit is a wall-mounting system. Please ensure the installation is
perpendicular and with AC plug at the bottom. Do not install the device on a
slanting wall. The dimensions of mounting bracket are shown as the following
figures. There are 12pcs of M6 screws required for mounting plate. Fix the
supplied wall-mount plate tightly on the wall before mounting the inverter to the
mounting plate.
To Next Page
Loading...
Need help?
General
