7
Quick installation guide for solar inverters RPI M6A M8A M10A EU V4 EN 5013221703 00 2017-11-16
60 seconds
Danger to life through electric shock
Potentially fatal voltage exists within the inverter during operation. This voltage persists even 60 seconds after
disconnection of the all the voltage sources.
Before working on the inverter, read the supplied manual and follow the instructions contained therein.
This inverter does not contain a transformer.
The housing of the inverter must be grounded if this is required by local regulations.
The inverter satises the Australian standard for electrical safety and the EMC standard. Applies only to Australia
and New Zealand.
WEEE mark
The inverter must not be disposed of as standard household waste, but in accordance with the applicable elec-
tronic waste disposal regulations of your country or region.
Display, buttons, and LEDs
Information on the type plate
ESC
Escape
Exit the current menu.
Cancel the setting for a parameter.
Changes are not adopted.
Down
Move downwards in the menu.
Reduce the value of a congurable
parameter.
Up
Move upwards in the menu.
Increase the value of a congurable
parameter.
ENT
Enter
Select menu item.
Open a congurable parameter for
editing.
Cancel the setting for a parameter.
Changes are adopted.
Grid Grid
Green LED; lights up when the
inverter is supplying power to the grid.
A
lArm Alarm
Red LED; displays a warning, an error
or a fault.
Components of the inverter