Delta RPI M6A Installation Guide

7
Installation guide for solar inverters RPI M6A M8A M10A EU V5 EN 2022-08-15
60 seconds
Risk of death due to electric shock
Potentially fatal voltage is present within the inverter during operation. This voltage persists even
60 seconds after disconnection of the all the voltage sources.
Before working on the inverter, read the supplied manual and follow the instructions provided.
This inverter does not contain a transformer.
The housing of the inverter must be grounded if this is required by local regulations.
The inverter meets the Australian Electrical Standards and the EMC standard. This applies only to
Australia and New Zealand.
WEEE mark
The inverter must not be disposed of as standard household waste, but in accordance with the appli-
cable electronic waste disposal regulations of your country or region.
Display, buttons, and LEDs
Information on the type plate
ESC
Escape
Exit the current menu.
Cancel the setting for a parame-
ter. Changes will not be applied.
Moves down.
Move downward in the menu.
Reduce the value of a congu-
rable parameter.
Moves up.
Move upward in the menu.
Increase the value of a congu-
rable parameter.
ENT
Enter
Select menu item.
Open a congurable parameter for
editing.
Cancel the setting for a parame-
ter. Changes will be applied.
Grid Grid
Green LED; lights up when the
inverter is supplying power to the
grid.
Alarm Alarm
Red LED; displays a warning, an
error or a fault.
Components of the Inverter

Delta RPI M6A Specifications

General

Brand	Delta
Model	RPI M6A
Category	Inverter
Language	English