5
Safety Notice
This manual includes safety precautions on user safety and how to prevent the servo press
from getting damaged, warnings and notes are used in this manual to describe how important
these safety precautions are. Warnings are used to describe supplementary explanations, users
must read the items in the warning, danger and stop carefully in order to prevent accidents or
causing injuries to the staff.
The installation and transportation of the servo press should be executed by qualified
personnel and should comply with the regional / country and local laws and regulation
requirements.
The servo press is partly-completed machine accordance with Machinery Directive
(2006/42/EC)pressing, the safeguards and related circuits are responsible by the final system
integrator.
This servo press was designed only as an accessory for specific applications. We strongly
suggest that this servo press should not be modified and/or used for any application processes
other than what it was designed for. If you have any application problems, please do not use the
servo press until you have received detailed explanations from your dealer.
The purpose of these introductions is to advise the customer and the operator on the
design, construction, operation and maintenance of Servo Press. The attached illustrations,
drawings and diagrams are intended to show the outstanding features, but are not binding for
dimensional accuracy or further details. It provides extremely high machining accuracy. Be careful
the properties of processing material, e.g. pressing, trimming or assemble of cold-metal, sheet or
other likes, etc.
It is forbidden to process flammable, toxic or explosion materials.
Definition of operators
The definition of servo press operators is as follows.
Operator
‧ Able to perform operations such as powering the controller ON/OFF.
‧ Able to start the servo press from the final system integrated operation panel.
Program editor
‧ Performs the operations on the servo press.
‧ Uses manual mode to operate the servo press or teach points, etc. outside the safety fence.
Repair or inspection personnel
‧ Perform simple operations of the servo press.
‧ Uses manual mode to operate the servo press outside the safety fence.
‧ Performs operations such as maintenance, repairs, adjustment and replacement, etc. to the
servo press and controller
FIRST RUN,
Product conforms to the Machinery Directive 2006/42/EC, Low Voltage Directive 2014/35/EU,
EMC Directive 2014/30/EU and related standards EN ISO 12100, EN ISO 16092-1, EN ISO 16092-2,
EN ISO 13857, EN 60204-1, EN 61000-6-2, EN 61000-6- 4, EN 61000-3-2, EN 61000-3-3.
Note: Please read the manual carefully before operating, maintaining or inspecting the servo press
and controller, and make sure to follow the safety regulations. Please contact our company for
details if you have any questions.
To Next Page
Loading...
Need help?
General
