Delta VFD-A Series User Manual

25
Accel / Decel Time Setting
Pr.10 Pr.11 Pr.12 Pr.13
Accel / Decel Time Setting
Parameter # 10
Parameter Name
Acceleration Time 1
Factory Setting
d010.0 Sec
Units
0.1 Sec
Parameter value
d000.1 - d600.0 Sec
 This parameter can be programmed while the drive is running.
 This parameter is used to determine the time required for the AC drive to ramp from
0 Hz to its Maximum operating frequency (Pr.03). The rate is linear unless S Curve
is “Enabled.”
Parameter # 11
Parameter Name
Deceleration Time 1
Factory Setting
d010.0 Sec
Units
0.1 Sec
Parameter value
d000.1 - d600.0 Sec
 This parameter can be programmed while the drive is running.
 This parameter is used to determine the time required for the AC drive to decelerate
from the Maximum operating frequency (Pr.03) down to 0 Hz. The rate is linear
unless S Curve is “Enabled.”
Time
Speed
Accel
Time
Decel
Time
Pr.10
Pr.11Pr.12
Pr.13
or
or
Command frequency
Call 1(800)985-6929 for Sales
deltaacdrives.com
sales@deltaacdrives.com
Call 1(800)985-6929 for Sales
deltaacdrives.com
sales@deltaacdrives.com

Delta VFD-A Series Specifications

General

Brand	Delta
Model	VFD-A Series
Category	DC Drives
Language	English