Chapter 7 Optional AccessoriesME300
7-70
8. Multi-state bitmap: on the toolbar, click
. The setup window of the multi-state is shown as the image
below. This object reads a bit’s property value from the PLC (ME300 does not support the PLC function).
It defines the image or text that appears when this bit is 0 or 1. Set the initial status (Current State) to be
0 or 1 to define the displayed image or text.
9. Unit Measurement: on the toolbar, click .
Open a new blank page, and double-click on that window to display the Units Setting dialog box.
Choose the Metrology Type and the Unit Name. For Metrology, the choices are Length, Square
Measure, Volume/Solid Measure, Weight, Speed, Time, and Temperature. The unit name changes
automatically when you change metrology type.
10. Numeric Input Setting: on the toolbar, click .
This object allows you to provide parameters or communication ports and to input numbers.
Open a new file and double-click on that window to display the Numeric Input Setting dialog box.
To Next Page
Loading...
Need help?
General