Chapter 7 Optional AccessoriesME300
7-45
7-12 Mounting Adapter Plate
This mounting adapter accessory is to change the wiring method for the ME300/MS300/MH300 series
to provide flexible installation. It changes the wiring from the main input/motor output at the bottom to the
main input from the top and the motor output from the bottom. However, when you use the mounting
adapter plate to change the drive from the VFD-E/VFD-EL series to the ME300/MS300/MH300 series, you
can still use the original wiring method. The following table shows the correspondences.
Series
Models
ME/MS/MH300 VFD-E VFD-EL
MKM-MAPB Frame A–B Frame A Frame A
MKM-MAPC Frame C Frame B Frame B
To Next Page
Loading...
Need help?
General