Chapter 7 Optional AccessoriesME300
7-75
LCM Display * Description Corrective Actions
File is locked with password
A setting cannot be changed because some data are
locked.
1. Check if the data are unlocked or able to be
unlocked. If the data are unlocked, try to change
the setting again.
2. Shut down the system, wait for ten minutes, and
then restart the system.
If none of the above solutions work, contact your local
authorized dealer for assistance.
File password failure
A setting cannot be changed because the password
is incorrect.
1. Check if the password is correct. If the password is
correct, try to change the setting again.
2. Shut down the system, wait for ten minutes, and
then restart the system.
If none of the above solutions work, contact your local
authorized dealer for assistance
File version mismatch
A setting cannot be changed because the version of
the data is incorrect.
1. Check if the version of the data matches the motor
drive. If it matches, try to change the setting again.
If the above solution does not work, contact your local
authorized dealer for assistance.
AC drive copy function time-out
A setting cannot be changed because the data
copying time-out expired.
1. Try copying the data again.
2. Check if copying data is allowed. If it is allowed, try
to copy the data again.
3. Shut down the system, wait for ten minutes, and
then restart the system.
If none of the above solutions work, contact your local
authorized dealer for assistance.
※ The content in this chapter only applies to KPC-CC01 keypad V1.01 and later version(s).
To Next Page
Loading...
Need help?
General