III
Connect the drive to a three-phase three-wire or three-phase four-wire Wye
system to comply with UL standards.
If the drive generates leakage current over AC 3.5 mA or DC 10 mA on a
grounding conductor, compliance with local grounding regulations or IEC61800-
5-1 standard is the minimum requirement for grounding.
NOTE
In the pictures in this manual, the cover or safety shield is disassembled only when explaining the details
of the product. During operation, install the top cover and wiring correctly according to the provisions.
Refer to the operation descriptions in the manual to ensure safety.
The figures in this instruction are only for reference and may be slightly different depending on your
model, but it will not affect your customer rights.
The content of this manual may be revised without prior notice. Consult our distributors or download
the latest version at http://www.deltaww.com/iadownload_acmotordrive.
To Next Page
Loading...
Need help?
General