Denon HEOS 3 HS2 User Manual

o
Swapping left and right channels in a stereo
pair
1
Tap the “Rooms” tab.
2
Tap the Pencil e icon to enter Edit mode.
3
Tap a Stereo Pair (a room which contains two matching
HEOS speakers) to edit the group.
4
Tap on the Swap L&R switch to swap the left and right
channels of the two speakers.
5
Tap the Back arrow to return to the list of Rooms.
6
Tap the Check Mark i icon to exit Edit mode.
o
Removing a stereo pair
1
Tap the “Rooms” tab.
2
Tap the Pencil e icon to enter Edit mode.
3
Tap a Stereo Pair (a room which contains two matching
HEOS speakers) to edit the group.
4
Tap on the Stereo Pair switch to return the paired
speakers to two individual speakers.
5
Tap the Back arrow to return to the list of Rooms.
6
Tap the Check Mark i icon to exit Edit mode.
Contents Setup Use Troubleshooting Status LED Appendix
36

Denon HEOS 3 HS2 Specifications

General

Number of drivers	2
Number of speakers	1
Audio output channels	2.0 channels
Amplifier class	D
RMS rated power	- W
AC (power) in	Yes
Frequency range	2.4 - 5 GHz
USB connector type	USB Type-A
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless
Product type	Stereo portable speaker
Product color	Black
Product design	Other
Volume control	Digital
Recommended usage	Universal
Power source type	AC

Weight and Dimensions

Width	- mm
Weight	- g