Denon HEOS 3 HS2 User Manual

Close splashguard
1
Remove the power connector from the speaker.
2
Press in the Splashguard so that it is firmly and evenly
attached.
.
Properly attaching the splashguard will make your HEOS 1 speaker
waterproof to the IPX4 standard. DO NOT submerge the speaker in water!
Turning off/on the battery
To turn off the battery, press and hold the button on the back of the battery
for 2 seconds. The LEDs will flash quickly then turn off, indicating that the
battery is off.
Turning off the battery will conserve battery power while you are not
playing music and HEOS 1 is not plugged in to AC power.
To turn the battery back on, press and hold the button again for 2 seconds.
.
NOTE
0
While the battery is disconnected from HEOS 1, it is always off.
Contents Setup Use Troubleshooting Status LED Appendix
51

Denon HEOS 3 HS2 Specifications

General

Number of drivers	2
Number of speakers	1
Audio output channels	2.0 channels
Amplifier class	D
RMS rated power	- W
AC (power) in	Yes
Frequency range	2.4 - 5 GHz
USB connector type	USB Type-A
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless
Product type	Stereo portable speaker
Product color	Black
Product design	Other
Volume control	Digital
Recommended usage	Universal
Power source type	AC

Weight and Dimensions

Width	- mm
Weight	- g