Denon HEOS 3 HS2 User Manual

The front LED of HEOS 1 flashes repeatedly
Solution Refer to Page
0
When the battery level is near zero the front LED of the HEOS 1 may flash repeatedly. This indicates that there is insufficient
power in the battery to boot up the speaker. Please connect the AC adapter to the speaker which will charge the battery. The
speaker can be used as normal while it is being charged.
50
Cannot pair a Bluetooth mobile device with the HEOS device
Solution Refer to Page
0
The connection from the Bluetooth mobile device is malfunctioning. Power cycle the mobile device, remove the pairing
information and re-pair the HEOS speaker to the mobile device.
–
0
Press and hold the Bluetooth button for 3 seconds and release the button when you see a pattern of two flashes on the status
LED. Make sure your mobile device has Bluetooth turned on and select “HEOS 1“ or "HEOS 3" speaker from the list of
Bluetooth devices.
－
Contents Setup Use Troubleshooting Status LED Appendix
53

Denon HEOS 3 HS2 Specifications

General

Number of drivers	2
Number of speakers	1
Audio output channels	2.0 channels
Amplifier class	D
RMS rated power	- W
AC (power) in	Yes
Frequency range	2.4 - 5 GHz
USB connector type	USB Type-A
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless
Product type	Stereo portable speaker
Product color	Black
Product design	Other
Volume control	Digital
Recommended usage	Universal
Power source type	AC

Weight and Dimensions

Width	- mm
Weight	- g