Denon RCD-M40 Owner's Manual

Setting the preset channels and
changing the received frequency on
the main unit
8/–, +/9 on the main unit can be used both for switching the preset
channel and for tuning.
Before operating them, switch the main unit to the “PRESET MODE” or
“TUNING MODE” using the procedure below.
1
Press SETUP.
2
Use ui to select “TUNER SETUP”, then press ENTER.
3
Use ui to select “MODE SELECT”, then press ENTER.
4
Use ui to select “PRESET MODE” or “TUNING MODE”,
then press ENTER.
PRESET MODE:
Press 8/–, +/9 on the main unit to
switch preset channels.
0
This is the same operation as
CHANNEL –, + on the remote control
unit.
TUNING MODE:
Press 8/–, +/9 on the main unit to
changethe received frequency.
0
This is the same operation as TUNE
–, + on the remote control unit.
RDS search
RDS is a broadcasting service which allows a station to send additional
information along with the regular radio program signal.
Use this function to automatically tune to FM stations that provide the RDS
service.
Note that the RDS function only works when receiving RDS compatible
stations.
1
Press TUNER to select “FM”.
2
Press DAB/RDS.
3
Use ui to select “RDS SEARCH”, then press ENTER.
4
Press o p.
Automatically begin the RDS search operation.
0
If no RDS station is found, “NO STATION” is displayed.
Contents Connections Playback Settings Tips Appendix
35
Front panel Display Rear panel Remote Index

Denon RCD-M40 Specifications

General

Digital tuner	Yes
CD changer	-
Product color	Black

Weight and Dimensions

Depth	234 mm
Width	145 mm
Height	238 mm
Weight	3500 g