Denon RCD-M40 Owner's Manual

Troubleshooting
1. Are the connections correct?
2. Is the set being operated as described in the owner’s manual?
3. Are the other devices operating properly?
If this unit does not operate properly, check the items listed in the table below.
Should the problem persist, there may be a malfunction. In this case, disconnect the power immediately and contact your store of purchase.
o
Power does not turn on / Power is turned off
Symptom Cause / Solution Page
Power does not turn on.
0
Check whether the power plug is correctly inserted into the power outlet. 24
Power automatically turns
off.
0
The sleep timer is set. Turn on the power again. 51
0
“AUTO STANDBY” is set. “AUTO STANDBY” is triggered when there is no operation for a set amount of
time. To disable “AUTO STANDBY”, set “AUTO STANDBY” on the menu to “OFF”.
58
o
LED is flashing
Symptom Cause / Solution Page
Flashing red. (Flashes at
0.25 second intervals)
0
The amplifier circuit in the unit has malfunctioned. Disconnect the power and contact the repair center. －
Flashing red. (Flashes at
0.5 second intervals)
0
Protection circuit activated due to a rise in internal temperature. Turn off the power, wait for the set to fully
cool down, then turn the power back on.
77
0
Core wires of two speakers are touching each other or a core wire is sticking out of the terminal and
touching the set’s rear panel, activating the protection circuit. First unplug the power cord, then twist the
core wires tightly or terminate the speaker cables, then reconnect.
77
Contents Connections Playback Settings Tips Appendix
61
Front panel Display Rear panel Remote Index

Denon RCD-M40 Specifications

General

Digital tuner	Yes
CD changer	-
Product color	Black

Weight and Dimensions

Depth	234 mm
Width	145 mm
Height	238 mm
Weight	3500 g