Denon RCD-M40 Owner's Manual

o
Operations cannot be performed through the remote control unit
Symptom Cause / Solution Page
Operations cannot be
performed through the
remote control unit.
0
Batteries are worn out. Replace with new batteries. 6
0
Operate the remote control unit within a distance of about 7 m from this unit and at an angle of within 30°. 6
0
Remove any obstacle between this unit and the remote control unit. －
0
Insert the batteries in the proper direction, checking the q and w marks.
6
0
The set’s remote control sensor is exposed to strong light (direct sunlight, inverter type fluorescent bulb
light, etc.). Move the set to a place in which the remote control sensor will not be exposed to strong light.
－
0
When using a 3D video device, the remote control unit of this unit may not function due to effects of
infrared communications between units (such as TV and glasses for 3D viewing). In this case, adjust the
direction of units with the 3D communications function and their distance to ensure they do not affect
operations from the remote control unit of this unit.
－
o
Display on this unit shows nothing
Symptom Cause / Solution Page
Display is off.
0
Press the DIMMER button on the remote control to set any setting other than OFF. 52
Contents Connections Playback Settings Tips Appendix
62
Front panel Display Rear panel Remote Index

Denon RCD-M40 Specifications

General

Digital tuner	Yes
CD changer	-
Product color	Black

Weight and Dimensions

Depth	234 mm
Width	145 mm
Height	238 mm
Weight	3500 g