Revision history—90001001
Revision Date Description
E May 2013 Added information on the banner feature.
F December
2016
n Updated the branding.
n Added Ethernet bridging feature.
n Expanded information under Configure the device using the
ConnectPort LTS web interface.
G May 2017 Removed the Declarations of conformity information from the
Specifications and certifications chapter.
H July 2018 Added pin-out information.
J December
2019
Added information about the unique, default password printed on the
device label.
Trademarks and copyright
Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United
States and other countries worldwide. All other trademarks mentioned in this document are the
property of their respective owners.
© 2019 Digi International Inc. All rights reserved.
Disclaimers
Information in this document is subject to change without notice and does not represent a
commitment on the part of Digi International. Digi provides this document “as is,” without warranty of
any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or
merchantability for a particular purpose. Digi may make improvements and/or changes in this manual
or in the product(s) and/or the program(s) described in this manual at any time.
Warranty
To view product warranty information, go to the following website:
www.digi.com/howtobuy/terms
Send comments
Documentation feedback: To provide feedback on this document, send your comments to
techcomm@digi.com.
Customer support
Digi Technical Support: Digi offers multiple technical support plans and service packages to help our
customers get the most out of their Digi product. For information on Technical Support plans and
Digi ConnectPort LTS User Guide
2
To Next Page
Loading...
Need help?
General