Digi ConnectPort LTS8 User Manual

Configure the device using the ConnectPort LTS web interface Peripheral
Digi ConnectPort LTS User Guide
99
For instructions on configuring an IP address using the LCD interface, see ConnectPort LTS LCD
interface.
XBee
The XBee configuration page has very similar settings to the Custom serial port profile.
For detailed information about XBee RF modules and commands for configuring them, please refer to
the ZigBee RF Modules User Guide.
XBee Port Settings
n Allow direct Access from networks: When enabled, you can access the XBee port in the same
manner that the custom profile accesses a serial port. This setting is Disabled by default.

Digi ConnectPort LTS8 Specifications

General

Brand	Digi
Model	ConnectPort LTS8
Category	Server
Language	English