Overview: Configuration, monitoring, and administration Configuration capabilities
Digi ConnectPort LTS User Guide
34
Configuration capabilities
Configuration options provide settings for the following features:
n Network Configuration: Specifies IP address settings, network service settings, and advanced
network settings.
n Serial Ports Configuration: Specifies serial port characteristics for the device.
n Alarms: Defines conditions that trigger alarms and notifications for alarms.
n System Configuration: Provides system-identifying information, such as a device description,
device location, and contact information.
n Users: Configures security features, such as enabling password authentication for device
users.
ConnectPort LTS administration capabilities
Administrative capabilities include the following:
n Uploading and managing files
n Changing the password for logging onto the device
n Backing up and restoring the configuration
n Updating firmware
n Restoring the configuration to factory defaults
n Rebooting the module
You can perform administration tasks using a number of interfaces, including the ConnectPort LTS
web interface and command line. See Administration for more information and procedures.
ConnectPort LTS configuration interfaces
The following table lists and briefly describes ConnectPort LTS configuration interfaces.
Configuration
interface Description
Digi Device
Discovery
Utility
Allows you to discover devices, open the web interface for a device, configure
network settings, and reboot the device. See Digi Device Discovery utility.
ConnectPort
LTS web
interface
Allows you to configure and monitor ConnectPort LTS devices. See Configure the
device using the ConnectPort LTS web interface.
Note Not all configuration options provided by the command-line interface (CLI)
appears in the web interface. If you need to configure more advanced options, see
the Access the command-line interface for instructions on accessing the CLI.
To Next Page
Loading...
Need help?
General