22
Anytime a change is made to a loop memory location (Rhythm Type,
Tempo, Time Signature, Record, Overdubs etc.) the STORE button LED
will immediately light indicating that the changes will be lost unless a store
procedure is performed before selecting a new loop memory location,
turning off the power, or connecting to the computer via USB.
Store Changes to a Loop
1. Stop any playback or recording activity using the STOP/TEMPO footswitch.
2. Press the STORE button. The STORE button and the DISPLaY will begin to
flash (the DISPLaY shows the current loop memory location).
3. (Optional)Turn the SELECT knob to select an empty loop memory location
to store the loop with its changes (the LOOP or SINgLE LEDs are off), or
press ExIT to abort.
4. Press the STORE button again. The changes are now saved and the STORE
button turns off.
Loops whose tempo has been sped up or slowed down take longer to
store than normal loops.
Copy a Loop to a Different Memory Location
1. Stop any playback or record activity using the STOP/TEMPO footswitch.
2. Select a memory location that contains a loop (either the LOOP or SINgLE
LED is lit).
3. Press the STORE button. The DISPLaY and the STORE button LED flash.
4. Turn the SELECT knob until an empty memory location is selected (the
LOOP and SINgLE LEDs are off), or press ExIT to abort.
5. Press the STORE button again. The loop is now copied to the new memory
location.
The Clear and Overdub Undo/Redo functions cannot be performed
after a Store/Copy procedure.
Storing/Copying Phrases
To Next Page
Loading...
Need help?
General
