27
Any phrase recorded into the JamMan
®
can be played in two ways: either
as a continuous Loop, or as a Single “one-shot” sample. Single phrases are
designed to play through only once and stop. All phrases are recorded as
loops first but they can be changed to a Single if desired and can always be
changed back to Loops later without harming the phrase. To change between
Single and Loop, follow these steps:
1. Select a previously recorded Loop phrase (LOOP LED is lit) using the
SELECT knob.
2. Press the LOOP/SINgLE button. The LOOP LED will turn off and the SINgLE
LED will now turn on indicating the phrase will now play back once when
the REC/PLaY/OVERDUb footswitch is pressed.
3. The STORE button will light to indicate this change must be stored if it is to
be recalled later.
4. Press the STORE button twice to store the changes, if desired.
Single phrases cannot have overdubs added to them. Repeated presses of
the REC/PLaY/OVERDUb footswitch will just restart the Single phrase playback
from the beginning.
Loop / Single Phrases
To Next Page
Loading...
Need help?
General
