To Next Page

To Previous Page

The JamMan is capable of recording in different Time Signatures. A Time

Signature must be set up prior to recording in a memory location. Once

a phrase has been recorded, Time Signature cannot be changed. To set the

Time Signature, follow these steps:

1. Select a new memory location. (The LOOP LED and SINgLE LED will be

off.)

2. Press the

button. It will now be lit.

3. Press the

button. The DISPLaY will now show the number

4 indicating the default Time Signature of four beats per measure.

4. Use the SELECT knob to change the Time Signature. You can select from

two to 15 beats per measure. This means if you want to record in 5/4 time,

select 5. To record in 7/8 time, select 7, and so forth.

The STORE button will light when Time Signature is changed but you can

immediately begin recording without having to store this change ﬁrst. The

LED will light red for the downbeat and then green for the

rest of the beats of the measure if a tempo has been set up.

When you press the

button while a recorded loop is

selected, the loop’s Time Signature appears in the DISPLaY, but it cannot be

changed.

Time Signature

DigiTech JAMMAN Manual

Other manuals for DigiTech JAMMAN