Getting Started
Making Connections
There are several different connection options available with the RP200. Before connecting the
RP200,make sure that the power to your amplifier and the RP200 is turned off.There is no
power switch on the RP200.To turn the RP200 on or off, simply connect or disconnect the
included PS0913B power supply from the Power Jack to an AC outlet.
Mono Operation
Connect your guitar to the Input of the RP200.Connect a single mono instrument cable from
the Stereo Output of the RP200 to the instrument input or effect return on your amplifier, or
to the line input of a power amp.
6
To Next Page
Loading...
Need help?
General
