Section Four - Other Functions
Rhythm Trainer
The RP200 includes several sampled drum patterns which are useful for developing a good sense
of timing.Pressing the Rhythm button will enable Rhythm mode and start playback of the drum
loop (except when in Store or Bypass mode). In Rhythm mode,the Parameter 1 knob selects
the drum Pattern,the Parameter 2 knob adjusts the drum Tempo, and the Parameter 3 knob
adjusts the Level of the drum loop.Press the Rhythm button again to stop playback of the drum
loop.
Jam-A-Long
The Jam-A-Long feature allows you to connect a Tape or CD to the RP200,and Jam with your
favorite artists.The signal from your tape or CD player is output through the left,right,and
headphone outputs of the RP200. To use the Jam-A-Long feature, connect the headphone output
of your tape or CD player to the Jam-A-Long Input on the rear panel of the RP200 using an
1/8” stereo cable,and press play on your tape or CD player.
Expression Pedal
The Expression Pedal on the RP200 can be assigned to control the RP200’s Volume,Wah,
Whammy™,Ya Ya™, or one of several other parameters in real time with your foot. When a
parameter has been assigned to the Expression Pedal,a programmable minimum and maximum
value can also be assigned.The procedure for assigning a parameter to the Expression Pedal is as
follows:
1.Press the Select button until the Expression row has been selected (indicated by the LED
lighting on the Expression row).
2.Rotate the Parameter 1 knob until the desired Parameter appears in the Display.Your
choices include:
27
To Next Page
Loading...
Need help?
General
