DigiTech RP200 User Manual

Factory Reset
This function resets the RP200 to its original factory settings.This procedure will erase all
custom user Presets, and recalibrate the Expression Pedal.
ATTENTION: Performing this function will erase all user-programmed data.All such data
will be lost forever! Be sure you want to erase the memory and start fresh
before continuing with this procedure.
The procedure for performing a Factory Reset is as follows:
1.Disconnect the power supply from the RP200.
2.Press and hold the Select button while re-connecting the power to the RP200.
3.When the display shows RST ?,release the Select button and press the Store button.
The display will briefly read RESET indicating that the RP200 has reset the original factory
settings.At this point, the RP200 will automatically advance to the Expression Pedal calibration
menu.Follow steps 4 through 7 of the Expression Pedal calibration section.
29

DigiTech RP200 Specifications

General

Brand	DigiTech
Model	RP200
Category	Music Pedal
Language	English