Pickup/Wah
The Pickup Simulator provides the thick tone of a humbucker pickup to a guitar with single
coil pickups,or the bright edgy sound of a single coil pickup to a guitar with a humbucker.This
allows you to have the best of both worlds without having to change guitars during a
performance.
Wah is an effect controlled by an Expression Pedal making the guitar sound as if it’s saying “Wah.”
Pickup Type - The Parameter 1 knob selects the Pick Up type which will be simulated.Values
include:PCk Of (Turns the Pickup Simulator off),SC>HUM (Gives a single coil
pick up the warm tone of a humbucker), and HUM>SC (Gives a humbucker the
unique sound of a single coil).
Wah Type -The Parameter 2 knob selects the Wah Type.Values include:WaH Of (Turns the
Wah Effect off),CRY (Cry Wah is a traditional sounding Wah), BOUTIQ (Boutique
Wah is a wide sweeping Wah with a more modern sound) and FULRNG (Full Range
Wah sweeps the entire spectrum of audible frequencies).
Wah Position - The Parameter 3 knob adjusts the Wah Pedal Position.Ranges from 1 (toe
up) to 99 (toe down).
Compressor
A Compressor is used to increase sustain, tighten up guitars,and prevent the signal from
clipping the input of other effects.It sets a maximum boundary for the strength of a signal.
Comp Type - The Parameter 1 Adjusts the length of time it takes for the Compressor to
respond to a signal exceeding the boundary. Values include:Cmp Of (Turns the
Compressor off) to fast, meDIUM,and slOw.
16
To Next Page
Loading...
Need help?
General
