DigiTech RPX400 User Manual

PreDelay - The Number 2 Knob adjusts the amount of time it takes for the initial sound to reach the first
reflective surface in the simulated environment. Ranges from 0 to 15.
Decay - The Number 3 Knob adjusts the length of time the Reverb is audible. Ranges from 1 to 99.
Damping - The Number 4 Knob controls the amount of sound which is absorbed in the simulated envi-
ronment. Ranges from 0 to 99.
Reverb Level - The Number 5 Knob adjusts the volume of the Reverb. Ranges from 0 to 99.
Expression Pedal
The Expression Pedal on the RPx400 can be assigned to control the RPx400’s Volume,Whammy™,Ya
Ya™, or just about any other parameter in real time with your foot. When a parameter has been
assigned to the Expression Pedal, a programmable minimum and maximum value can also be assigned.
The procedure for assigning a parameter to the Expression Pedal is as follows:
1. Press the Select button until the Expression row has been selected (indicated by the LED lighting on
the Expression row).
2. Rotate the Number 1 Knob until the word
PEDAL appears in the Display.
3. Rotate the Number 2 Knob until the desired Parameter appears in the Display.
4. Rotate the Number 3 Knob to select the minimum value the assigned parameter will reach with the
Expression Pedal in the toe up position (not available when volume is the assigned parameter).
5. Rotate the Number 4 Knob to select the maximum value the assigned parameter will reach with the
Expression Pedal in the toe down position (not available when volume is the assigned parameter).
6. Store your Expression Pedal assignment to your Preset. See page 9 for more information on the stor-
ing procedure.
Parameters that can be controlled by the Expression Pedal are as follows:
A GAIN (Amp Gain) - Expression Pedal controls the Amp Gain or amount of distortion for the selected
Amp Type.
AMPLVL (Amp Level) - Expression Pedal controls the Volume of the selected Amp Type.
Modulation Effects Parameters
Active Effect Available Parameters
Chorus
Speed (Speed), Depth (Depth)
Flanger
Speed (Speed), Depth (Depth), Regen (Regeneration)
Triggered Flanger
Speed (Speed), SENSTV (Sensitivity), LFOSTR (LFO Start)
Phaser
Speed (Speed), Depth (Depth), Regen (Regeneration)
Triggered Phaser
Speed (Speed), SENSTV (Sensitivity), LFOSTR (LFO Start)
Tremolo SPEED (Speed), DEPTH (Depth)
Vibrato SPEED (Speed), DEPTH (Depth)
Rotary Speaker SPEED (Speed), DEPTH (Depth), DOPLER (Doppler)
Panner SPEED (Speed), DEPTH (Depth)
YaYa ™ PEDAL (Pedal), DEPTH (Depth), RANGE (Range)
Auto Ya™ SPEED (Speed), DEPTH (Depth), RANGE (Range)
SynthTalk ATTACK (Attack), RELEAS (Release), VOX (Vox), SENSTV (Sensitivity)
Envelope Filter AMOUNT (Amount), SENSTV (Sensitivity)
Detune AMOUNT (Amount)
Pitch Shift AMOUNT (Amount)
Whammy™ AMOUNT (Amount)
YAYA (YaYa™) - Expression Pedal acts as a Ya Ya™ Effect when YaYa™ is engaged.
WHAMMY (Whammy™) - Expression Pedal acts as a Whammy™ Pedal when Whammy™ is engaged.
EFFLVL (Effect Level) - Expression Pedal controls the Mix Level of the selected Modulation Effect Type.
20
Creating Presets

DigiTech RPX400 Specifications

General

Brand	DigiTech
Model	RPX400
Category	Music Pedal
Language	English