The S-100 also offers an additional menu of hard to find effects including: a Vocoder effect which takes a vocal signal (using
the Left input) and superimposes it onto another input signal such as a keyboard (using the Right input) to produce a vocal
effect that sounds more robotic than human. This menu also provides you with a Ring modulator that can produce mathe-
matically-based harmonic effects. And last but not least, we have also included a state-of-the-art Compressor that is ideal for
making any signal stand out with the right amount of compression. The parameters for these effects are as follows:
Frequency This parameter sets the modulation frequency of the Ring Modulator
effect. Range is from 1 to 99.
Threshold This parameter sets threshold level of the compressor. Range is 60 to 0.
Ratio This parameter sets the compressor ratio. Range is from 1 to 19
and ∞.
Attack This parameter controls the attack time of the compressor. Range is
from 1 to 10.
Gain This parameter allows you to set the overall gain of the selected effect.
Range is from -19 to 20.
Type This parameter allows you to select the different types of Vocoder effect
setting in the S-100. Types include: 1-5.
Sibilance This parameter allows you to set the amount of Essing that is passed
through the Vocoder effect. Range is from 0 to 99.
Level This parameter allows you to set the overall level of the selected effect.
Range is from 0 to 100.
Other Effects
Effect Name
Parameter 1
Parameter 2 Parameter 3
Parameter 4
Vocoder - Cd
Ring Modulator- Rg
Frequency - Fr
Sibliance - si
Type - Tp
N/A
N/A
N/A
Level - L
Level - L
Compressor - Co
Threshold - Th Ratio - Rt Attack - At
Gain - gA
S-100
User Guide
17
Section - 3 Effects and Parameters
To Next Page
Loading...
Need help?
General
