Decay - The Number 2 Knob adjusts the length of time the Reverb is audible. Ranges from 1 to 99.
Damping - The Number 3 Knob controls the amount of sound which is absorbed in the simulated
environment. Ranges from 0 to 99.
Reverb Level - The Number 4 Knob adjusts the volume of the Reverb. Ranges from 0 to 99.
Master Level - The Number 5 Knob controls the Vx400’s Master Level.
Expression Pedal
The Expression Pedal on the Vx400 can be assigned to control the Vx400’s Volume,Whammy™, or just
about any other parameter in real time with your foot. When a parameter has been assigned to the
Expression Pedal, a programmable minimum and maximum value can also be assigned. The procedure for
assigning a parameter to the Expression Pedal is as follows:
1. Select a User or the Factory Preset.
2. Press the SELECT button until the light in the Expression row of the Matrix’s LED begins flashing.
3. Rotate the Number 1 Knob to select the Expression pedal 1,2, or 3.
Note: You can assign three parameters to the Expression pedal per preset.
4. Rotate the Number 2 Knob to select the parameter the pedal will control.
5. Rotate the Number 3 Knob to adjust the minimum value the pedal (toe up) reaches.
6. Rotate the Number 4 Knob to adjust the maximum value the pedal (toe down) reaches.
7. Press the STORE button to store the changes. See page 8 for more information on storing presets.
The following is a list of the parameters that can be assigned to the Expression pedal:
(Voice and Effect Parameters depend on the type that is currently selected).
Parameter Display Min Value Max Value
Voice Param 1 Varies Varies Varies
Voice Param 2 Varies Varies Varies
Voice Level
VOXLVL 199
Effect Speed
param 1 Varies Varies
Amount/Depth
Param 2 Varies Varies
Effect Level FXLEVL 099
Effect Mix FX MIX 099
Whammy WHMAMT 199
Delay Feedback FBACK 1 99 R-hold
Delay In Level DLY IN 099
Delay Out Level DLY OUT 099
Reverb Decay DECAY 199
Reverb In Level Rvb IN 099
Reverb Out Level RVbOUT 099
Volume Pre VOLPRE ----- -----
Volume Post VOLPST ----- -----
HALL = Hall
PLATE = Plate
ROOM = Wood Room
CHAMBER = Chamber
GARAGE = Parking Garage
CHURCH = Church
ARENA = Arena
SPACE = Space
16
Creating Presets
To Next Page
Loading...
Need help?
General
