Prepare - 34 FX20 Operator’s Manual
Prepare Jobsite
CMW
Prepare Jobsite
Prepare Excavation Point
• Clear the area to be excavated. Remove rocks or branches too large for vacuum hose.
• If excavating fluids while drill string is moving, clear area of trees, shrubs, and weeds.
• Select a solid area to stand on while excavating.
Jobsite hazards could cause death or serious injury. Use
correct equipment and work methods. Use and maintain proper safety
equipment.
NOTICE:
• If jobsite classification is in question or if the possibility of unmarked electric utilities exists, classify
jobsite as electric.
• Cutting high voltage cable can cause electrocution. Expose lines by hand before using unit.
• All vegetation near operator’s station must be removed. Contact with trees, shrubs, or weeds during
electrical strike could result in electrocution.
To Next Page
Loading...
Need help?
General
