Ditch Witch FX20 User Manual

FX20 Operator’s Manual Transport - 39
Attach Skid to Trailer
CMW
Attach Skid to Trailer
Bolt skid to S4S trailer at 4 locations. Use bolt and
nut (1,2) to secure. Tighten to 200-225 ft•lb (270-
305 N•m). Install light strip to rear of tank using
bolts and nuts (3,4). Connect wiring harness from
light strip to connector (5).
Attach Skid to Truck Bed
Use indicated tiedowns to secure skid to truck
bed. Be sure to tie down both front and rear of
unit. The skid can also be bolted to a truck bed
using the 4 holes indicated above.
IMPORTANT: See parts manual for correct bolt
size and grade.
NOTICE: Use a chain, not a strap, if using the
lift/tiedown point on top of the tank.

Ditch Witch FX20 Specifications

General

Brand	Ditch Witch
Model	FX20
Category	Industrial Equipment
Language	English